Friday, November 28, 2008

Configuring DNS If You’re Using MooPS

Follow these steps:

  1. Select Launch MooPS from the Start>All Programs>MooPS menu. After a few moments, the MooPS status window appears.
  2. From the Options menu, select Server Settings.
  3. When the MooPS – Server Settings window appears, enter the following:
  • Your computer’s IP address into the Redirect IP Address field.
  • Change the drop-down selection under IP Address from (Any) to your computer’s IP address
  • Your router’s IP address (the gateway address) into the IP Address field under DNS Client
  • Change the IP address under Web Server from (Any) to your computer’s IP address Click OK when you are done. If you don’t change the IP addresses in the drop-down lists that say (Any), MooPS will likely crash when you attempt to use it. If you don’t know your IP address and router address settings.Now that your server is configured you need to start it. From the Server menu, select Start. MooPS should then start its services and tell you everything’s okay.

No comments: